SATA RAID PCI Card - 2 eSATA and 2 Internal SATA Ports
Based on the Silicon Image SiI 3124 chipset
supports up to 4 SATA I or SATA II hard drives!
Two external eSATA and two internal
SATA ports for your high performance SATA hard drives. Whether you need Striping (RAID 0), Mirroring (RAID 1),
Mirrored Striping (RAID 1+0) or Parity Striping (RAID 5),
this card has you covered. Also functions as non-RAID controller for up to 4 individual
drives!
Features:
Silicon Image SiI 3124 chipset supports up to 4 SATA 1.5Gb/sec or 3.0Gb/sec drives
Two external eSATA and two internal SATA ports
Compliant with Serial ATA II specification (the extension of SATA 1.0a Revision 1.1)
Compliant with Gen2i, Gen2m SATA II Electrical specification Revision 1.0
Backward compatible with SATA 1.0
PCI 32-bit, 33/66 MHz host interface
Integrated PCI DMA engines
Metal shielded Serial ATA connectors for extra durability
Supports SATA data rates up to 3Gb/sec (300 MB/s)
Supports Native Command Queue (NCQ), Port Multiplier, First Party DMA
Supports RAID 0 (striping), RAID 1(mirroring) and RAID 0+1 (striping & mirroring) for performance and reliability
Use as non-RAID controller for up to 4 individual
drives
Supports SATA I and SATA II hard drives of any capacity
What's In the box:
SATA PCI RAID Card
CD with drivers and RAID Software
Quick Installation Guide
Specifications:
2 eSATA and 2 internal SATA ports
PCI Bus: 32-bit, 33/66 MHz
Supports SATA data rates up to 3Gb/sec (300 MB/s)
FIFO: 256 Bytes per channel
Supports first-party DMA commands for Native Command Queuing
Supports SATA Port Multipliers
Supports SATA I and SATA II hard drives of any capacity
Integrated PCI DMA engines
Supports Spread Spectrum Receiver
Supports RAID 0, RAID 1, RAID 1+0, RAID 5
Works as a non-RAID controller to add up to 4 individual drives
Supports Hot Swapping of drives
Minimum System Requirements
Pentium II 400 MHz or faster desktop computer with available PCI slot
Windows 2000, Windows XP, Windows Server 2003 or Windows XP 64-bit
